Silicone Ice Cube Maker & Ice Bucket Cup Mold – 2-in-1 Cooling Magic (random Color)

 2-in-1 Design – Make and store ice in the same container
✅ Flexible Food-Grade Silicone – Easy to pop out ice cubes
✅ Holds Up to 120 Ice Cubes – Compact yet high-capacity
✅ Lid Included – Keeps ice clean and odor-free
✅ Perfect for Home, Office, Outdoor Parties & More

Whether you’re chilling drinks or keeping your wine cold, this reusable and portable ice bucket mold is a must-have for every kitchen.

How to Use:
1. Pull out the inner cylinder, pour water into the silicone container, and the position that is slightly more than 2 grids does not exceed 2 and a half grids.
2. Slowly insert the inner cylinder with the cover into the silicone cavity, pay attention to rotating it to the bottom and holding it down, and then gently squeeze the silicone side exhaust under the cover to prevent the inner cylinder from floating.
3. Snap the lid onto the ice bucket. Put in the refrigerator until all the water freezes. (4-6 hours).
4. Put the mold at room temperature for a few minutes; if you don’t want to wait and press hard, you can pour an appropriate amount of hot water into the inner cylinder for about 10 seconds, pour out the hot water, and you can easily pull out the inner cylinder.
5. Once frozen, remove the ice bucket from the refrigerator. Remove the cover and squeeze firmly on all sides of the outer cavity.
Tips:
1. The bucket in the middle is pulled out after freezing.
2. It is recommended to be frozen for 4-6 hours.
3. Please do not use strong detergent to clean the ice bucket to avoid corrosion. Keep these ice buckets away from the fire to prevent them from deforming.